| << E-Mon D-Mon Submeters |
E-Mon D-Mon Class 5000
Three-Phase Advanced kWh/Demand Smart Meters
with Dual Protocol Communication |
 
E-mon Class 5000 Series
Shown |
|
|
- Advanced 4-line display showing:
- kWh
- kW demand (with peak date & time)
- Power factor per phase
- Real-time load in kW
- Amps per Phase
- Volts per phase
- On-board set-up option for:
- Meter date/time
- IP address
- ID codes for EZ7, Modbus and BACnet
- 0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption. (Optional solid-core current sensors available in 100 & 200 amp.)
- Onboard installation diagnostics and verification system.
- Two external meter inputs (water, gas, BTU, etc.) (Channels 5 & 6 available via E-Mon Energy only)
- Phase loss alarm. (N.O. Contact)
- Built-in RS-485 communications capability supports the following connection configurations (or combinations not to exceed 52 devices per channel):
Cabling can be either daisy-chain or star configuration, 3-conductor, 18-22 AWG, up to 4,000 cable feet total per channel.
- Communications: Built-in communication
- RS-485 and Ethernet
- Optional telephone modem
- Protocols (*NOTE: Interval data not stored in BACnet or LonWorks units.)
- EZ7
- Modbus RTU
- Modbus TCP/IP
- BACnet MS/TP*
- BACnet IP*
- LonWorks FT-10 (Twisted Pair)*
- Records kWh & kVARh delivered, kWh & kVARh received in first four channels.
- Data stored in 15-min. intervals for up to 72 days or 5-minute intervals for up to 24 days.
- Maintains interval data storage in a first-in, first-out format.
- Compatible with E-Mon Energy software via EZ7 protocol for automatic meter reading, billing and profiling of interval energy data.
- Meter is designed for use on both 3-phase, 3-wire (delta) and 3-phase, 4-wire (wye) circuits.
- Outdoor NEMA 4X polycarbonate enclosure (standard) with padlocking hasp & mounting flanges for indoor/outdoor installation (stand alone) with one 1 1/16" KO on bottom of enclosure.
- Optional Enclosure: Industrial grade JIC steel enclosure with padlocking hasp and mounting flanges for indoor installation (stand alone).
- Knockouts: 1 1/16" (3/4" cond.) on bottom and 7/8" (1/2" cond.) on top of enclosure.
- UL/CUL Listed. Certified by independent test lab to ANSI C12.20 national accuracy standards. (+/- 0.2% from 1% to 100% of rated load)
- MV-90 Compatible (with EZ7 only.)
|
The E-Mon D-Mon Class 5000 Three-Phase Advanced kWh/Demand Smart Meters with Dual Protocol Communication
is a 3-phase meter with communications. The device is used to monitor electric power usage of individual loads after the utility meter
and store kW and kVAR data for automatic meter reading. The E-Mon D-Mon Class 5000 Three-Phase Advanced kWh/Demand Smart Meters is
dual protocol capable and provides both RS485 and Ethernet communications. Installation must only be performed by qualified personnel
and in accordance with these instructions and all applicable local and national electrical codes.
E-Mon D-Mon Class 5000 Three-Phase Advanced kWh/Demand Smart Meters with Dual Protocol Communication are labeled for 120/208V
service MUST NOT be installed on service feeds of 277/480 volts or 347/600 and vice versa. Verify that the E-mon Class 5000 meter's
current sensors are sized suitably for the load to be monitored.
|
| |
| E-Mon D-Mon Class
5000 Three Phase Meters Ordering Information |
| Model |
Phases |
Amps |
Volts |
Wires |
CTs Incl. |
Buy |
Price |
| 120/208-240V, 3 Phases, 3 or 4 Wire |
| ** Please contact us for MMU-Style meters or meters with Outdoor Enclosure. ** |
| E50208100R |
3 |
100A |
120/208-240V |
3 or 4 |
3 |
 |
$918.00 |
| E50208200R |
3 |
200A |
120/208-240V |
3 or 4 |
3 |
|
$918.00 |
| E50208400R |
3 |
400A |
120/208-240V |
3 or 4 |
3 |
|
$918.00 |
| E50208800R |
3 |
800A |
120/208-240V |
3 or 4 |
3 |
|
$1,040.00 |
| E502081600R |
3 |
1600A |
120/208-240V |
3 or 4 |
3 |
|
$1,040.00 |
| E502083200R |
3 |
3200A |
120/208-240V |
3 or 4 |
3 |
|
$1,290.00 |
| 277/480V, 3 Phases, 3 or 4 Wire |
| E50480100R |
3 |
100A |
277/480V |
3 or 4 |
3 |
|
$981.00 |
| E50480200R |
3 |
200A |
277/480V |
3 or 4 |
3 |
|
$981.00 |
| E50480400R |
3 |
400A |
277/480V |
3 or 4 |
3 |
|
$981.00 |
| E50480800R |
3 |
800A |
277/480V |
3 or 4 |
3 |
|
$1,103.00 |
| E504801600R |
3 |
1600A |
277/480V |
3 or 4 |
3 |
|
$1,103.00 |
| E504803200R |
3 |
3200A |
277/480V |
3 or 4 |
3 |
|
$1,353.00 |
| 347/600V, 3 Phases, 3 or 4 Wire |
| E50600100R |
3 |
100A |
347/600V |
3 or 4 |
3 |
|
$981.00 |
| E50600200R |
3 |
200A |
347/600V |
3 or 4 |
3 |
|
$981.00 |
| E50600400R |
3 |
400A |
347/600V |
3 or 4 |
3 |
|
$981.00 |
| E50600800R |
3 |
800A |
347/600V |
3 or 4 |
3 |
|
$1,103.00 |
| E506001600R |
3 |
1600A |
347/600V |
3 or 4 |
3 |
|
$1,103.00 |
| E506003200R |
3 |
3200A |
347/600V |
3 or 4 |
3 |
|
$1,353.00 |
| Communication Protocol & Option Packages |
| Code |
Ethernet Port |
RS-485 Port
(Note: Interval data not stored in BACnet or LonWorks units.) |
Additional Cost |
| **Alternate Communication Protocol & Option Packages must be ordered at time of Purchase** |
| 01 |
EZ7 Ethernet |
EZ7 |
Standard Config. |
| 02 |
EZ7 Ethernet |
Modbus RTU |
|
Add $250.00 |
| 03 |
EZ7 Ethernet |
BACnet MS/TP |
|
Add $250.00 |
| 04 |
Modbus TCP/IP |
EZ7 |
|
Add $250.00 |
| 05 |
BACnet IP |
EZ7 |
|
Add $250.00 |
| 06 |
Modbus TCP/IP |
Modbus RTU |
|
Add $250.00 |
| 07 |
EZ7 Ethernet |
Lonworks FT-10 |
|
Add $398.00 |
| 08 |
Modbus TCP/IP |
Lonworks FT-10 |
|
Add $398.00 |
| 09 |
EZ7 Ethernet |
EZ7 w/Telephone Modem |
|
Add $188.00 |
| 10 |
Modbus TCP/IP |
EZ7 w/Telephone Modem |
|
Add $438.00 |
| 11 |
BACnet IP |
EZ7 w/Telephone Modem |
|
Add $438.00 |
| Additional Metering Components |
| Current Sensors |
| Split Core |
Class 3200 Meters include 3 Split-Core Current Sensors, replacement/additional sensors can be purchased here |
| Solid Core |
Solid Core Current Sensors can be purchased separately more > |
| Software |
| WRSOFT50 |
E-Mon WRSOFT50 Energy Software Package and Start-Up (for 1-50 Meters) |
|
$5,789.00 |
| WRSOFT100 |
E-Mon WRSOFT100 Energy Software Package and Start-Up (for 51-100 Meters) |
|
$10,251.00 |
| WRSOFT250 |
E-Mon WRSOFT250 Energy Software Package and Start-Up (for 101-250 Meters) |
|
$13,159.00 |
| WRSOFT1000 |
E-Mon WRSOFT1000 Energy Software Package (for 251+ Meters) - Please Call to Order |
Please Call |
| Third-Party Products |
| We have a variety of Third-Party Products available to compliment E-Mon D-Mon submeters for "One-Stop" Submetering Shopping including
Gas Meters, Hot & Cold Water Meters and a Wireless Electric Socket Meter Package. Read all of your utilities from one convenient location via
E-Mon Energy™ software. |
|
)
PDF Help