<< E-Mon Additional Metering Components, Software & Accessories
E-Mon D-Mon P3 Pulser
Pulse Output Option for Interface to EMS Systems
|
Pulser data to the EMS can be used for the following applications:
- Tenant billing, based on both kilowatt-hour and kilowatt
demand information from the E-Mon D-Mon meters through the
pulsers
- "Real-time" demand reading, allowing the user to see the
effects of loads as they come on- or of f-line
- Automatic load shedding/limiting by the EMS to lower
energy usage and costs
|
|
 
E-Mon P3 Pulser Shown
|
|
|
| |
|
The E-Mon D-Mon P3 Pulser is an optically/coupled interface device
that allows the Class 1000
or Class 2000 kWh or kWh/Demand meter to be connected
to an energy/building management system (EMS) for the purpose of
data-gathering and/or load control. The pulse width and value are
selected using 2 DIP switches, and can be tailored to fit your
specific requirements in the field. A modular plug connects the pulser to the E-Mon D-Mon meter; a two-screw terminal provides easy
connection to the EMS. A LED on the pulser shows the rate and
duration of the pulse. The pulser has an operating range of 4.5 to
28 volts dc (supplied by the EMS). |
|
|
|
Ordering Information |
| Model |
Description |
Buy |
Price |
| P3PULSER |
E-Mon P3-Pulser Pulse
Output Option for interface to EMS systems |
 |
$166.00 |
E-Mon Catalog |
E-Mon Pricelist
$25.00 Minimum on Total Order
____________________________________________________________
99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:
Copyright © Fotronic Corporation
All Rights Reserved
)
